Home > Household Appliance Test Equipment >

CNAS Abrasion Resistance Test

Product Categories

Ingress Protection Test Equipment [46]
IEC Test Equipment [58]
Flammability Test Equipment [40]
Plug Socket Tester [60]
Test Finger Probe [44]
Impact Testing Apparatus [32]
Lamp Cap Gauge [36]
Light Testing Equipment [30]
Environmental Testing Chambers [28]
Electrical Appliance Tester [26]
Household Appliance Test Equipment [24]
Cable Testing Equipment [22]

Guangzhou Shice Equipment Co., Ltd.

Contact Now

CNAS Abrasion Resistance Test

Brand Name : SHC

Model Number : SC-ASRT

Certification : CNAS、TUV、ITS、CSA、BV、SGS (cost additional)

Place of Origin : China

MOQ : 1 unit

Price : USD 1000-5000 Unit

Payment Terms : T/T, Western Union, MoneyGram, L/C

Supply Ability : 999 units per month

Delivery Time : in 15 working days

Packaging Details : Carton

Standard : IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2

control system : PLC + touch screen

Drive mode : stepper motor-driven

Scratching speed : 0-25mm/s adjustable

Testing times : 0-9999times,it can be preset

Scratching distance : Adjustable

Working table : 360° rotatable

Scratching pressure : 10N±0.5N, it can be equipped with the weight of 20N to reach the scratching pressure of 30N±0.5N

Contact Now

Abrasion Strength Resistance Testing Machine IEC60335-1 clause 21.2

Product information:

The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances.

It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2.

Technical parameters:

Input voltage	230V/50Hz
control system	PLC + touch screen
Drive mode	stepper motor-driven
Scratching speed	0-25mm/s adjustable
Testing times	0-9999times,it can be preset
Scratching distance	Adjustable
Working table	360° rotatable
Scratching pressure	10N±0.5N, it can be equipped with the weight of 20N to reach the scratching pressure of 30N±0.5N
Radius of Steel Pin	0.25±0.02mm

This device adopts a hardened steel pin for scratching.

The end of the pin is form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0,25 mm ± 0,02 mm. Scratches are made by drawing the pin along the surface in a plane perpendicular to the conductor edges at a speed of 20 mm/s ± 5 mm/s. The pin is so loaded that the force exerted along its axis is 10 N ± 0,5 N.

The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.

Scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.

Product Tags: